| 11:30 AM (26 minutes ago) |  | ||
| ||||
ATTENTION ALL PBX TELECOMMUNICATION COMPANIES!
Situation:
You've just sold a new PBX system to a customer. Their current system's extensions terminate on a 66 block or another type of termination field backboard. The terminations and configurations differ from the new system. For example, the old PBX might be a Mitel 200X, and the new one is a Mitel 200 ICP. The old system's station cards have 12 ports, while the new ICP has 24 port cards. Additionally, the CO lines on the old system are configured with 8 ports, skipping every other pair, while the new system has an 8x4 combo card with LS/GS lines not skipping any pairs.
Challenge:
How do you get the wiring ready for a smooth and fast cutover, minimizing troubles and cutting in the new machine as quickly as possible?
Solution:
Instead of re-crosswiring each individual station device and CO line—which is extremely time-consuming and prone to errors—a new approach is available: Hydra Cables.
Hydra Cables are pre-made cables with the correct connectors, such as 25-pair Amphenol cables (male/female), configured with the exact pair-for-pair layout of the old machine. For example, two 12-pair station connections (from the old system) connect into a single 24-station Hydra cable, which then connects to the new ICP cards.
Example:
A Hydra cable can connect an old Mitel 200 SX to a new Nortel 9000, using Amphenol to RJ48 pair connectors, or any specified configuration (e.g., Amp to Amp).
Case Study:
A recent project involved upgrading a Mitel 200 SX with 120 rooms to a Mitel ICP. The old method required 8-12 hours to build a new 66 field. Using Hydra Cables, the cutover time was reduced to just 10 minutes. The preparation desk time and cable manufacturing saved both us and the customer significant time and money.
Cost of cables and design: Less than $350
Field work time: Less than 1 hour
Old method cost (T&M): $1500
Save time, reduce errors, and cut costs with Hydra Cables for your PBX upgrades.
Situation:
You've just sold a new PBX system to a customer. Their current system's extensions terminate on a 66 block or another type of termination field backboard. The terminations and configurations differ from the new system. For example, the old PBX might be a Mitel 200X, and the new one is a Mitel 200 ICP. The old system's station cards have 12 ports, while the new ICP has 24 port cards. Additionally, the CO lines on the old system are configured with 8 ports, skipping every other pair, while the new system has an 8x4 combo card with LS/GS lines not skipping any pairs.
Challenge:
How do you get the wiring ready for a smooth and fast cutover, minimizing troubles and cutting in the new machine as quickly as possible?
Solution:
Instead of re-crosswiring each individual station device and CO line—which is extremely time-consuming and prone to errors—a new approach is available: Hydra Cables.
Hydra Cables are pre-made cables with the correct connectors, such as 25-pair Amphenol cables (male/female), configured with the exact pair-for-pair layout of the old machine. For example, two 12-pair station connections (from the old system) connect into a single 24-station Hydra cable, which then connects to the new ICP cards.
Example:
A Hydra cable can connect an old Mitel 200 SX to a new Nortel 9000, using Amphenol to RJ48 pair connectors, or any specified configuration (e.g., Amp to Amp).
Case Study:
A recent project involved upgrading a Mitel 200 SX with 120 rooms to a Mitel ICP. The old method required 8-12 hours to build a new 66 field. Using Hydra Cables, the cutover time was reduced to just 10 minutes. The preparation desk time and cable manufacturing saved both us and the customer significant time and money.
Cost of cables and design: Less than $350
Field work time: Less than 1 hour
Old method cost (T&M): $1500
Save time, reduce errors, and cut costs with Hydra Cables for your PBX upgrades.
Comments
- http://bit.ly/Y0tmgZ
my page :: Watch or Download Remember Me Full Movie
the internet. Disgrace on Google for not positioning
this submit upper! Come on over and visit my web site .
Thank you =)
my web page; laptop ieftin sh
Depending upon the condition of the warts the doctor
may prescribe different options for removing genital warts.
The main reason why so many people swear by this product is because it actually seems to work, unlike so many other skin products that make only the slightest
bit of difference, if indeed they do anything at all.
my webpage ... buy wartrol - -